We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Mounting bracket.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Mounting bracket(1*4) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.

Mounting bracket Product List

1～14 item / All 14 items

Displayed results
Duct Mounting Fitting "Connection Fitting S"

Duct Mounting Fitting "Connection Fitting S"

The surface finish is 3C (trivalent chrome)! There are tapped holes for component mounting, so nutting is unnecessary.

The "Connection Kanag S" is a convenient product for supporting ducts, wiring, small parts, etc. All Kanag models have tapped holes for attaching parts (except for S-5), so there is no need for nuts. S-11 and S-11B are used when connecting U-1 and U-26 at right angles (S-11B has a 9φ hole instead of a tapped hole). Additionally, S-20-25 and S-20-32 are sturdy right-angle connection Kanags, so please use them for securing heavy objects. 【Lineup (partial)】 ■S-4-3C ■S-4-5-3C ■S-5-3C ■S-6-3C ■S-6B-3C *For more details, please refer to the PDF document or feel free to contact us.

  • Assembly Jig
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Mirror Introduction Case] Mirrors provide a sense of security while passing through!

[Mirror Introduction Case] Mirrors provide a sense of security while passing through!

Installed in a high-risk area! A case that provided a sense of security during passage (Ito Chotankai).

We would like to introduce a case where Komi Corporation implemented the "FF Mirror Corridor (Left and Right)" at Ito Chotanpa. The company had previously been concerned about collisions and installed mirrors in front of the first-floor entrance and the break rooms on the fourth and fifth floors. The first-floor entrance is a high-traffic area where employees frequently pass through during lunch and commuting times, and it is also common for carts to pass through during deliveries and shipments, making it a dangerous location. After installation, the presence of the mirrors provided a sense of security during passage, and employees have expressed, "It's nice to have the mirrors." 【Case Overview】 ■ Product Used: FF Mirror Corridor (Left and Right) ■ Effect: Provides a sense of security and allows for confirmation of people coming from blind spots. *For more details, please refer to the PDF document or feel free to contact us.

  • mirror
  • Other safety equipment
  • Other safety and hygiene products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Safety Measures Mirror Implementation Case: Monitoring Care Facilities with Mirrors!

Safety Measures Mirror Implementation Case: Monitoring Care Facilities with Mirrors!

Monitoring, collision prevention, and near-miss measures. With mirrors, it is possible to confirm the presence of outgoing individuals and support the prevention of falls! Introducing customer feedback.

We would like to introduce a case where the mirrors we handle were implemented at Life Commune Minami-Yono. In this facility, mirrors were installed at the entrance on the first floor to allow staff to see residents leaving, and on the second and fourth floors to enable caregivers to monitor residents in the corridors. Monitoring and supporting the risk of falls is an important task. The mirrors have enabled a quicker response. [Case Study] ■ Products Used: Super Oval, Lami ■ Customer Feedback: We are now able to respond quickly with the mirrors. *For more details, please refer to the PDF document or feel free to contact us.

  • Other safety and hygiene products
  • Other safety equipment
  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Camera tripod mounting bracket (with earth mounting butterfly bolt) TRS3

Camera tripod mounting bracket (with earth mounting butterfly bolt) TRS3

A bracket for attaching a mobile antenna that requires grounding to a camera tripod.

● TRS3 (TRS-3) is a mounting bracket for camera tripods manufactured by Daiwa (Diamond), equipped with a butterfly bolt for grounding. ● It is a bracket for attaching mobile antennas that require grounding to a camera tripod. * The grounding effect increases the longer the ground wire is in contact with the ground. If the ground wire is elevated from the ground or deployed on a balcony, the radial effect may decrease, and the SWR may not improve. In this case, increasing the number of ground wires or lengthening the ground wire can help. When installing on a balcony, connecting the ground wire to the railing may improve the situation. ● It comes with an MLJ-MJ connector and a 20cm 3D-2V coaxial cable. ● Since it includes a butterfly bolt for grounding, the ground wire can be secured with a butterfly screw. ● It is ideal for operating mobile station radios. ● It complies with the European environmental regulation RoHS directive. * For more details, please feel free to contact us.

  • Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Two-Sided Mirror Mounting Bracket for Curved Mirrors

Two-Sided Mirror Mounting Bracket for Curved Mirrors

This is a bracket for installing a curved mirror as a double-sided mirror.♪

This is a bracket for installing curved mirrors symmetrically on both sides using a two-sided mirror on pillars, utility poles, or walls. It comes as a set with a straight arm and an angled arm, which is useful for installing curved mirrors at T-junctions. *Note that special brackets are required for installation on walls or utility poles.

  • Other safety and hygiene products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Acrylic Safety Mirror (φ165mm) / M1417SM-P165C

Acrylic Safety Mirror (φ165mm) / M1417SM-P165C

● Durable and ultra-lightweight, for accident prevention, safety checks, crime prevention, and shoplifting prevention in stores. ● Just peel off the sticker and stick it on.

● Durable and ultra-lightweight, for accident prevention, safety checks, crime prevention, and shoplifting prevention in stores. ● Just peel off the sticker and stick it on. ● For collision prevention, eliminating blind spots, and security measures in factories.

  • Other safety and hygiene products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mounting bracket (shaft joint type)

Mounting bracket (shaft joint type)

We use zinc-coated steel for the material! Let me introduce our mounting brackets.

Ecold Japan Co., Ltd. handles mounting brackets (shaft joint type). We offer "ADKG" and "ADKU" in sizes M5, M8, M10, and M14. The products are made of zinc-plated steel. Please feel free to contact us if you have any requests. 【Specifications】 ■Material: Zinc-plated steel *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor Half Dome for Curve Mirrors, Safety Mirrors, and Security Mirrors

Outdoor Half Dome for Curve Mirrors, Safety Mirrors, and Security Mirrors

To prevent collisions at outdoor T-intersections!

The field of view is over 180°. Designed to prevent collisions at outdoor T-intersections with poor visibility. Newly introduced in response to customer demand for mirrors that can be used outdoors. *Please avoid installation in areas with vehicle traffic. For collision prevention at indoor T-intersections, we have… Lami / Half Dome Mirrors / FF Mirrors for corridors (left and right).

  • mirror
  • Other safety and hygiene products
  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mounting bracket (fork type) 'GA56'

Mounting bracket (fork type) 'GA56'

Using galvanized steel! Introducing fork-type mounting brackets.

At Ecolde Japan Co., Ltd., we handle the mounting bracket (fork type) 'GA56'. It is made of zinc-plated steel, with options available in stainless steel AISI 303 (V2) and AISI 316 (V4). Additionally, we also offer the M20 'GA80' and M24 'GA99'. Please feel free to contact us if you have any requests. 【Specifications】 ■ Material: Zinc-plated steel ■ Options: Stainless steel AISI 303 (V2), AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mounting bracket (hinge joint type)

Mounting bracket (hinge joint type)

The option is stainless steel AISI 303 (V2)! Introducing products with hinge joint types.

At Ecolde Japan Co., Ltd., we handle mounting brackets (hinge joint type). The option is stainless steel AISI 303 (V2), and the material used is zinc-plated steel. We offer products such as "AG27," "AG36," and "AG43." Please feel free to contact us if you have any requests. 【Specifications】 ■Material: Zinc-plated steel ■Option: Stainless steel AISI 303 (V2) *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mounting bracket (ball joint & socket type) 'WX30'

Mounting bracket (ball joint & socket type) 'WX30'

Using zinc-coated steel! Introducing products with ball joint and socket types.

At Ecoled Japan Co., Ltd., we handle the mounting brackets (ball joint & socket type) 'WX30'. We offer options in stainless steel AISI 303 (V2) and AISI 316 (V4). Additionally, we use zinc-plated steel for the material. Please feel free to contact us if you have any requests. 【Specifications】 ■ Material: Zinc-plated steel ■ Options: Stainless steel AISI 303 (V2), AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mounting bracket (eyelet type) "AK17"

Mounting bracket (eyelet type) "AK17"

The material used is zinc-coated steel and Delrin 100! Introducing our mounting hardware.

At Ecolde Japan Co., Ltd., we handle the mounting hardware (eyelet type) 'AK17'. The materials used are zinc-plated steel and Delrin 100, with options available in stainless steel AISI 303 (V2) and AISI 316 (V4). Additionally, we also offer other models such as 'AK21' and 'AU27'. Please feel free to contact us if you have any requests. 【Specifications】 ■Material: Zinc-plated steel, Delrin 100 ■Options: Stainless steel AISI 303 (V2), AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Curve mirror, safety mirror, security mirror, fork exit mirror

Curve mirror, safety mirror, security mirror, fork exit mirror

To alleviate the anxiety of forklift operators and improve work efficiency! Fork exit mirrors for curved mirrors and safety measures!

The "Forklift Exit Mirror" from the 【Curve Mirror・Safety Mirror】 series is a mirror that allows you to see the approach of forklifts, making it ideal for factories and warehouses. It enables safety checks while operating the forklift, helping to alleviate the concerns of forklift operators and improve work efficiency. 【Features】 ■ Suitable for outdoor use ■ Mirror that allows you to see the approach of forklifts ■ Oval mirror for easy safety checks ■ Helps alleviate concerns for fork operators and improve work efficiency *For more details, please refer to the PDF document or feel free to contact us.

  • mirror
  • Other safety equipment
  • Other safety and hygiene products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Curve, Safety, Security Elevator Mirror 'FF Mirror for Three-Way Frame'

Curve, Safety, Security Elevator Mirror 'FF Mirror for Three-Way Frame'

Preventing elevator ride leftovers and pinch accidents! It contributes to energy savings and cost reduction through safe operation and a decrease in the number of ascents and descents! A free lending program is also currently in place.

The "FF Mirror for Three-Way Frames" of 【Curve Mirrors, Safety Mirrors, Security Mirrors】 is a revolutionary mirror that contributes to energy savings and cost reduction by ensuring safe elevator operation and reducing the number of trips. It is suitable for preventing passengers from being left behind or caught, with safety being the top priority in medical facilities. It helps prevent accidents involving patients getting caught and ensures safe entry and exit when moving food carts or beds. Additionally, it allows for waiting for wheelchair-bound patients. A collection of case studies for hospitals is also available! 【Features】 ■ For elevators and indoor use only ■ Prevents passengers from being left behind or caught ■ Ensures safe operation and reduces the number of trips ■ Allows confirmation of whether anyone is attempting to board without having to stick one’s head out of the cabin ■ Used by sticking it to the three-way frame on each floor ■ Larger and with a wider viewing area compared to the "FF Mirror for Cages," making it ideal for thorough safety measures *For more details, please contact us or refer to the catalog. *Free lending program is also available.

  • Other safety and hygiene products
  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Mounting bracket

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.